Car Park Boom Gates in Melbourne — Shop by Brand, Arm Length and Use Case
Filters
6 products
Which Car Park Boom Gate Do You Need?
The right car park boom gate comes down to two things: arm length and duty cycle.
Getting either one wrong results in a gate that doesn’t physically fit your lane, or one that fails months after installation from being run harder than it was designed for.
How To Choose Your Arm Length
Measure the width of your entry or exit lane, then select the arm length that spans it with 200–300mm to spare on each side. Gate arms that sit too short cause vehicles to clip the post. By contrast, too long gate arms create clearance issues with adjacent structures.
| Lane Width | Recommended Arm Length | Typical Application |
|---|---|---|
| Up to 2.8m | 3m arm | Residential driveway, single-lane entry |
| 2.9m to 3.8m | 4m arm | Strata car park, small commercial entry |
| 3.9m to 4.8m | 5m arm | Commercial car park, loading dock |
| 4.9m and wider | 6m arm | Multi-lane commercial, industrial facility |
How To Choose Your Duty Cycle
Duty cycle refers to how many open-and-close cycles a boom gate motor is rated to handle per day before it needs to rest.
- Do not select a gate rated below your actual daily traffic; that’s a costly mistake.
- If your site runs two shifts or operates 24 hours, size up one tier from what you calculate. Overworked motors can fail before the warranty period ends.
| Use Level | Daily Cycles (estimate) | Typical Site | Recommended Model Tier |
|---|---|---|---|
| Light | Up to 50 | Residential strata, small office car park | Beninca EVA |
| Medium | 50 to 200 | Commercial car park, school, medical centre | Beninca DIVA, Roger Bionik |
| Heavy | 200 and above | Warehouse, shopping centre, hospital car park | BFT Giotto, FAAC B680, Roger Bionik |
Boom Gates For Apartment Complexes and Strata Buildings
Strata committees and owners corporations have a different set of priorities. You are buying for a building full of residents, presenting a quote to a committee, and often looking for a gate that is straightforward to maintain without calling a technician every three months.
- Beninca EVA is one of the most popular car park boom gates for residential strata in Australia. Running quietly on a 24V DC motor, it easily caters to driveway spans up to 5 metres (EVA 5) and pairs natively with RFID cards, remotes, and exit loops for a complete, low-maintenance entry system.
- Beninca DIVA is a 24V DC brushless motor that opens a 3m arm in 0.9 seconds with continuous use capability, suited to buildings where residents cycle through the gate repeatedly across peak hours.
Both models are stocked in Australia with local warranty support.
If you need a quote to take to your strata committee, contact our team and we can put together a complete system specification including access control.
Need a gate for an underground car park with a low ceiling clearance? See our articulated boom gates for basement and underground applications.
Boom Gates For Commercial Car Parks and Large Facilities
High-traffic commercial sites need a gate motor that is built for continuous operation.
- BFT Giotto is a 24V heavy-duty barrier with arm length options from 3m to 6m. It is suited to busy commercial car parks, shopping centres, and industrial access points where the gate is cycling constantly across business hours.
- FAAC B680 handles high commercial volume using an internal 24V DC motor powered by standard 230V mains supply. It is built for sites needing continuous operation, offering integrated speed control, soft start/stop deceleration, and built-in obstacle detection for arms up to 5 metres.
- Roger Bionik handles up to 2,500 operations per day on a 36V brushless motor, opening a 4m arm in 2 seconds, purpose-built for demanding car park environments.
For multi-gate sites or facilities that need ANPR, RFID or ticketing integration, speak to our team before ordering.
Get in touch with our team for high-volume or multi-gate enquiries.
Car Park Boom Gate Buying Guide
Arm Length and Lane Width
Measure centre-to-centre of your entry lane posts or kerbs, then match the result to the arm length table above. If your entry has a reverse angle or a slight curve, measure at the widest point.
Duty Cycle In Plain English
A gate motor's duty cycle is a percentage: it tells you how much of every hour the motor can run without overheating. A motor with a 50% duty cycle can run for 30 minutes in every 60.
For busy commercial sites, look for motors rated at 80% duty cycle or higher, or motors rated by cycles per day (typically 500 cycles/day and above for heavy-duty applications).
24V DC vs 230V AC
24V DC motors are safer to install in residential and light commercial settings, run more quietly, and are compatible with solar backup power.
230V AC motors deliver higher torque for longer arms (5m+) and high-cycle applications. Most car park boom gates for strata and light commercial sites run on 24V DC.
Access Control
Every car park boom gate can be paired with an access control system to determine who is authorised to open it. Options include:
- Remote controls
- RFID cards and fobs
- PIN keypads
- Intercoms
- Loop detectors
- ANPR cameras
See our full guide to boom gate car park access control to compare methods and find compatible products for your gate brand.
Our team provides professional installation across Melbourne and ongoing gate servicing if you need support beyond the product itself.
Frequently Asked Questions
What size boom gate do I need for a car park?
Match the arm length to your lane width. A 3m arm suits lanes up to 2.8m wide. A 4m arm suits lanes between 2.9m and 3.8m. A 5m arm covers lanes up to 4.8m. A 6m arm is for lanes 4.9m and wider. Always allow 200–300mm clearance on each side of the arm tip.
How much does a car park boom gate cost in Australia?
Entry-level car park boom gates for strata and light commercial use start from around $2,400 to $3,200 for the motor and arm. Mid-range commercial systems typically range from $3,500 to $5,500. Heavy-duty models and complete kits including access control can range from $5,000 upward depending on configuration. Pricing shown on each product page reflects the full kit including motor, arm, and standard accessories.
What brands do you stock?
Powered Gates Australia stocks BFT, FAAC, Beninca, Roger Technology, Centsys, and Tousek boom gate systems. All brands are available with local warranty support and Australian stock.
Do boom gates come with remote controls?
Most boom gate kits include one or two remote controls as standard. Additional remotes are available separately. For sites with multiple users, RFID card systems are more practical than distributing a large number of individual remote controls.
What duty cycle do I need?
For residential strata or small commercial car parks with up to 50 daily cycles, a standard light-duty motor is sufficient. For 50 to 200 cycles per day, select a medium-duty model. For more than 200 cycles daily, or for any site that operates across two shifts or overnight, choose a heavy-duty motor rated for high-cycle continuous operation.
Can a car park boom gate integrate with access control?
Yes. Every boom gate we stock has a relay input that accepts a trigger signal from an external access control device. Remote controls, RFID readers, PIN keypads, intercoms, and ANPR cameras all connect via this relay.
See our boom gate access control collection for compatible products, or contact us for a full system recommendation.