Sliding Gate Rack - Nylon with Steel Core - 500kg

Nylon gear rack required for automatic sliding gate's to connect between the gate and the motor. It is usually screwed on with a 12 gauge metal screw (not supplied - 4 per meter) and is supplied in one meter lengths. (eg. 3.5 meter gate will need 4 x 1m nylon rack)

For gates up to 500kg on flat ground.

Keep in mind you will require an extra half meter than your opening width. 

TIP: You will also need to ensure there is a 1-2 mm gap between the gate motor cog and the rack so the gate does not damage the motor!